Foaming Water-Based Oil Splitting Degreaser / Alkaline Degreaser with Oil Splitting Properties

General Description

QUICK SPLIT is a blend of water based surfactants, water based solvents, and alkaline detergents, specifically formulated to clean oily deposits from hard surfaces. QUICK SPLIT is blended specifically for cleaning applications where the waste stream must pass though passive or active oil water separators. QUICK SPLIT will temporarily trap the oily waste in the water during the cleaning process and will quickly split, thus allowing for complete separation of the oily waste from the water solution in the downstream processing equipment.
At normal surfactant use dilutions, QUICK SPLITis moderate to high foaming. It is the ideal product for cleaning systems that do not require low foaming detergents. QUICK SPLIT will add wetting and detergency. It is an oil splitting detergent (it will not tend to emulsify soils).

For cleaning applications requiring low foam, QUICK SPLIT 12 is a suggested product. For systems requiring no foam, QUICK SPLIT 50NF is a suggested product.

Application

QUICK SPLIT can be applied by almost any means including mops, rags or spray equipment. Allow solutions to penetrate deposits before rinsing. Do not allow cleaning solutions to dry on surfaces before hosing.

Dilutions

QUICK SPLIT is a concentrated cleaner and should be diluted for best results:

Heavy 1 part QUICK SPLIT 2 parts water
Medium 1 part QUICK SPLIT 5 parts water
Light 4 oz. QUICK SPLIT 1 gallon water

Availability

QUICK SPLIT is available in UN approved 5 gallon pails, 55 gallon drums and bulk quantities.

Handling

Observe warning label on containers. Normal precautions for industrial chemicals apply.

aka: QUIK SPLIT
uses include: cleaning
 

  pdf Quick Split PB (24 KB)