QUICK SPLIT 50NF - Non-Foaming Water-Based Oil Splitting Degreaser
QUICK SPLIT 50NF is a blend of non-foaming surfactants, water based solvents, and alkaline detergents, specifically formulated to clean oily deposits from hard surfaces. QUICK SPLIT 50NF is blended specifically for cleaning applications where the waste stream must pass though passive or active oil water separators. QUICK SPLIT 50NF will temporarily trap the oily waste in the water during the cleaning process and will quickly split, thus allowing for complete separation of the oily waste from the water solution in the downstream processing equipment.
At normal surfactant use dilutions, QUICK SPLIT 50NF is non- foaming. It is the ideal product for cleaning systems that require low foaming detergents. QUICK SPLIT 50NF will add wetting and detergency. It is an oil splitting detergent (it will not tend to emulsify soils).
For cleaning applications requiring some foam and a tolerance for a slower splitting speed, QUICK SPLIT 12LF is a suggested product.
QUICK SPLIT 50NF can be applied by almost any means including mops, rags or spray equipment. Allow solutions to penetrate deposits before rinsing. Do not allow cleaning solutions to dry on surfaces before hosing.
QUICK SPLIT 50NF is a concentrated cleaner and should be diluted for best results:
|Heavy||1 part QUICK SPLIT 50NF||2 parts water|
|Medium||1 part QUICK SPLIT 50NF||5 parts water|
|Light||4 oz. QUICK SPLIT 50NF||1 gallon water|
QUICK SPLIT 50NF is available in UN approved 5 gallon pails, 55 gallon drums and bulk quantities.
Observe warning label on containers. Normal precautions for industrial chemicals apply.
uses include: cleaning
pdf Quick Split 50NF PB (125 KB)