Products - Drilling and Production Chemicals

 


ENVIRO SPEC 1510
Spotting Fluid / Extreme Pressure Lubricant

ENVIRO SPEC 1510 is a non-toxic, biodegradable, water soluble, high solids, combination long chain aliphatic phosphate ester and polyglycol monoester additive for spotting fluids. It will quickly penetrate into the wall cake, incorporating the existing water into the spotting fluid, and at the same time, coats the native or commercial clays to eliminate further water absorption, causing partial dehydration of the wall cake. As the cake dehydrates, it becomes less cohesive and allows penetration

Read more...
 
ENVIRO SPEC 550
Spotting Fluid

ENVIRO SPEC 550 is a high solids, surfactant based, oil soluble additive for spotting fluids. It effectively increases the soaking rate of spotting oil and at the same time causes dehydration of the wall cake. As the cake dehydrates, it becomes noncohesive and allows penetration of the spotting fluid and wetting of the drill pipe. The force necessary to free the pipe is therefore greatly reduced.

Available in UN approved 55 gallon drums and bulk quantities.

Read more...
 
GUMBO GONE
Reduction of Shale Hydration, water soluble drilling additive, corrosion inhibitor and extreme pressure lubricant

GUMBO GONE is a water soluble drilling additive that is non-toxic, non-foaming, non-flammable, and biodegradable. GUMBO GONE contains a combination of proprietary additives that inhibit the hydration of the shale by satisfying the unbalanced ionic charges in the clays and by forming a protective film that blocks entry of water into the shale. This protective film prevents hydration of the shale which helps reduce bit balling, collar plugging, sloughing, enlarged hole and hole-fill on trips.

In

Read more...
 

JMN Specialties, 1100 Victory Drive,Westwego, LA 70094 Toll Free in USA: 1-800-547-6344
Specialty Chemicals and Services  |  ISO 9001:2000  |  ISO 14000