BWT-L777 is an advanced organic boiler water treatment to control pH corrosion, scale and sludge. The neutralized organic acids of BWT-L777 remove nominal oxygen presence and inhibit the boiler from corrosion forming an organic iron compound. The correct pH is maintained by a unique blend of low molecular weight compounds which avoid pitting corrosion. Use of these compounds avoid "under deposit" corrosion which is caused by excess alkalinity in conventional treatment.
BWT-L777's blend of
C-613 is a specially formulated corrosion inhibitor for use in Glycol dehydration systems which incorporates an effective corrosion inhibitor system with a pH buffering additive that maintains the pH of the glycol system at 7-9 thus minimizing corrosion from acid gases such as H2S and CO2.
C-613 offers maximum pacification of metal surfaces in treated systems. It is normally added to the glycol system based on laboratory titration data. Effective treatment may be achieved by using the rate of
SPEC HIB 218 is a heterocyclic amine blend that is soluble in water and insoluble in oil. SPEC HIB 218 is a highly active inhibitor specially designed for use in pickling fluids, whether in fresh or brine waters. SPEC HIB 218 is extremely soluble in high brines with little or no tendency to “fall out” of solution.
When applied to metal surfaces, even after draining of fluid, a protective film remains behind to provide protection from rust and corrosion. Available in UN approved 5 gallon pails,
SPEC HIB 310ES is a combination surfactant, catatonic, filming amine corrosion inhibitor and oxygen scavenger for use in fresh waters and brines. SPEC HIB 310ES will control corrosion from salt water due to CO2, inorganic salts, dissolved oxygen and H2S contamination from sour fluids or bacterial action.
SPEC HIB 310ES forms a clear solution with all natural and synthetic oil field brines. The calculated LC50 is 172,891 ppm with a 95% confidence interval of 123,414 ppm and 237,006 ppm.
SPEC HIB 410 is a filming corrosion inhibitor and oxygen scavenger for use in fresh waters and brines. SPEC HIB 410 will control corrosion from salt water due to CO2, inorganic salts, dissolved oxygen and H2S contamination from sour fluids or bacterial action. SPEC HIB 410 forms a clear solution with all natural and synthetic oil field brines. SPEC HIB 410 contains NO amines. SPEC HIB 410 is recommended for use in low to medium weight calcium based packer pipeline fluids, salt water drilling
SPEC HIB-510 is a heterocyclic fatty amine blend that is soluble in water and insoluble in oil. SPEC HIB-510 is a highly active inhibitor specially designed for use in pickling fluids, wither in fresh or brine waters.
SPEC HIB- 510 is very effective in protecting pipelines that have oil / water mixtures from corrosion. SPEC HIB-510 is extremely soluble in high brines with little or no tendency to “fall out” of solution. Available in 5 gallon pails and 55 gallon drums.
SPEC HIB 900 is a one-part Universal Add Pak that incorporates cutting-edge inhibitor technology to provide a reasonably priced antifreeze additive package. SPEC HIB 900 possesses several advantages associated with organic long life add paks, including lower dissolved solids levels and the absence of sometimes objectionable add pak components. SPEC HIB 900 is a non-silicate, non-phosphate, non-nitrate, non-nitrite one-part inhibitor package. It contains additives to minimize hot surface scaling
JMN Specialties, 1100 Victory Drive,Westwego, LA 70094 Toll Free in USA: 1-800-547-6344 Specialty Chemicals and Services | ISO 9001:2000 | ISO 14000