OIL FINISH 15 is an outstanding water displacing, non-staining rust preventative which will rapidly separate water displaced from metal surfaces after machining operations or after alkali cleaning. The resulting film is oily, transparent, and non-staining. These ultra thin, highly protective films are effective in the protection of ferrous and non-ferrous metals from atmospheric corrosion even under conditions of high humidity, both fresh or salt mists.

Materials protected with OIL FINISH 15

OIL FINISH PLUS is a water displacing, solvent cutback, oil concentrate corrosion preventive compound. In addition to its corrosion preventive properties, OIL FINISH PLUS can be formulated into speciality lubricants and penetrants. The resulting films are oily, transparent, and non-staining.

OIL FINISH PLUS is used in its diluted form to protect ferrous and non-ferrous industrial parts and transportation components. Available in 5 gallon pails, 55 gallon drums and bulk quantities.

PROTEK 8020 is a unique formulation of special water-soluble additives in a powder form, designed to enhance water blasting performance and prevent the formation of surface/flash rust of ferrous surfaces. It is also very effective in protecting ferrous metals from flash rust after hot tank cleaning processes. Use 1 – 2 pounds of PROTEK 8020 per 100 gallons of water.

This product is also available in a liquid form as PROTEK 8025. Available in UN approved 50 pound pails and 450 pound drums.

PROTEK 8025 is the liquid version of PROTEK 8020. Designed to prevent the formation of flash rust on ferrous surfaces during and after water blasting or vat dipping. This particular protectant is perfect to temporarily halt rust prior to painting metal surfaces.

Use in 10% concentration with fresh water. Available in UN approved 5 gallon pails and 55 gallon drums.

RP-300 is an outstanding water displacing, non-staining rust preventative that will rapidly separate water displaced from metal surfaces after machining operations or after alkali cleaning. The ultra thin, highly protective films are effective in protecting ferrous and non-ferrous metals from atmospheric corrosion even under conditions of high humidity.

Various blends of RP-300 meet or exceed the following: MIL-C-16173 GRADE 3, GRADE 5; MIL-C-22235; MIL-C-81309 TYPE II, III. Request the

RP-500 is an outstanding water displacing, non-staining rust preventative that will rapidly separate water displaced from metal surfaces after machining operations or after alkali cleaning. The ultra thin, highly protective films applied to unpainted or painted surfaces are effective in the protection of ferrous and non-ferrous metals from atmospheric corrosion even under conditions of high humidity, both fresh or salt mists. Various blends of RP-500 meet or exceed the following MIL-SPECS:

RP-600 is an outstanding water displacing, non-staining rust preventative that will rapidly separate water displaced from metal surfaces after machining operations or after alkali cleaning. The ultra thin, highly protective films applied to unpainted or painted surfaces are effective in the protection of ferrous and non-ferrous metals from atmospheric corrosion even under conditions of high humidity, both fresh or salt mists.

Materials protected with this product are protected indefinitely for

RP-606 is a cosmoline-like product applied by brush to coat metal parts for long term outdoor storage. This selfhealing compound will protect metal parts against the harshest of elements including salt water and salt water spray. RP-606 may be cut with mineral spirits or other high evaporative hydrocarbon solvents to allow for spraying onto surfaces to be protected.

RP-606 meets specifications covered under MIL-C-16173D, Grade 4; MIL-C- 008.93A (MR); MIL-C-62218 (AT). There’s no better product