MUD-FLOC 45 is a non hazardous, chemically inert product that will prevent mud and silt from settling in tanks, pipeline systems, and open or closed cooling water systems. MUD-FLOC 45 will effectively remove settled mud and silt sediments and biodegradability is over 99%. Available in 5 gallon pails and 55 gallon drums.

NO RUST 7 is a blend of penetrants, acrylic converters and proprietary acids specially formulated to neutralize and convert existing rust and to form a durable, black protective barrier against corrosion.

NO RUST 7 is designed to provide excellent protection on all iron and steel surfaces. Available in 1 gallon containers, 5 gallon pails and 55 gallon drums.

RP-300 is an outstanding water displacing, non-staining rust preventative that will rapidly separate water displaced from metal surfaces after machining operations or after alkali cleaning. The ultra thin, highly protective films are effective in protecting ferrous and non-ferrous metals from atmospheric corrosion even under conditions of high humidity.

Various blends of RP-300 meet or exceed the following: MIL-C-16173 GRADE 3, GRADE 5; MIL-C-22235; MIL-C-81309 TYPE II, III. Request the

RP-606 is a cosmoline-like product applied by brush to coat metal parts for long term outdoor storage. This selfhealing compound will protect metal parts against the harshest of elements including salt water and salt water spray. RP-606 may be cut with mineral spirits or other high evaporative hydrocarbon solvents to allow for spraying onto surfaces to be protected.

RP-606 meets specifications covered under MIL-C-16173D, Grade 4; MIL-C- 008.93A (MR); MIL-C-62218 (AT). There’s no better product

SPEC COAT 250 is a specially formulated blend of petroleum asphalt and mineral spirits designed to offer a protective coating to anchor chains and other equipment requiring protection against external elements. It gives economical protection to surfaces for painting and to surfaces from which the film must be readily available.

SPEC COAT 250 should be diluted with mineral spirits or used as received. Available in UN approved 5 gallon pails and 55 gallon drums.

SPEC HIB 310ES is a combination surfactant, catatonic, filming amine corrosion inhibitor and oxygen scavenger for use in fresh waters and brines. SPEC HIB 310ES will control corrosion from salt water due to CO₂, inorganic salts, dissolved oxygen and H₂S contamination from sour fluids or bacterial action.

SPEC HIB 310ES forms a clear solution with all natural and synthetic oil field brines. The calculated LC50 is 172,891 ppm with a 95% confidence interval of 123,414 ppm and 237,006 ppm.

SPEC HIB 603LV is a heterocyclic amine blend that is soluble in water and insoluble in oil. SPEC HIB 603LV is a highly active inhibitor specially designed for use in pickling fluids, whether in fresh or brine waters. SPEC HIB 603LV is extremely soluble in high brines with little or no tendency to “fall out” of solution.

When applied to metal surfaces, even after draining of fluid, a protective film remains behind to provide protection from rust and corrosion. Available in 5 gallon pails and 55