AC-140 is an aqueous blend of acid, detergent, inhibitors and water-soluble solvents designed to rapidly clean equipment contaminated by water and scale deposits. This light amber acid cleaner is recommended for acidizing process equipment by circulating engineered dilutions using acid resistant pumps and related equipment.

AC-140 is great for derusting and descaling food-processing equipment. Available in UN approved 5 gallon pails, 55 gallon drums and bulk quantities.

AC-1458 is a combination of organic acids, solvents, wetting agents and corrosion inhibitors designed for cleaning multi-metal cooling systems, heat exchangers, piping and external metal surfaces. AC-1458 is very effective in removing rust, rust stains; carbonate scales and organic material normally found in cooling systems and process equipment.

It is also effective in removing tars, paraffin, sludge, and other hydrocarbon residues. It is safe for use on carbon steel, stainless steel and cast

AC-180 is an acidic formulated scale inhibitor designed to remove and inhibit calcium carbonate deposits. This chemical is ideal for batch treatment in deep wells where scaled pumps are a problem. Liners and tubing can be effectively descaled through application. AC-180 may be injected continuously or used in batch treating programs.

For removal of scale contamination on external surfaces of pipe, heat exchangers and related equipment, AC-180 may be applied by local spray appliance. Available

AC-700 is a concentrated neutral pH solution specially formulated to remove rust, mineral scale and corrosion by-products from radiators, cooling systems and other heat transfer systems.

This clear, green cleaner is safe to use in cleaning multi-metal systems containing carbon steel, copper and aluminum. The pH is 5.8 making it a minor eye nor skin irritant. Available in UN approved 5 gallon pails, 55 gallon drums and bulk quantities.

AC-700M is a biodegradable cleaner for heat transfer systems, hot oil units, glycol dehydration systems, cooling systems (radiators) as well as de-rusting / de-scaling tanks, piping and related equipment. This concentrated solution is specially formulated to remove rust, mineral scale and corrosion by-products from most heat transfer systems.

ET-700M is safe to use in cleaning multi-metal systems containing carbon steel, copper and aluminum. The pH is 3.5 - 4. Available in UN approved 5 gallon

General Cleaning Procedures

CITRA-50 CLEANER is a concentrated, inhibited aqueous citric acid solution suitable for use in industrial cleaning applications. Concentration solutions are very effective in the removal of metal oxide deposits in power plant boilers, dehydration units, heat exchangers and various types of heat transfer systems. CITRA-50 CLEANER solutions are very effective in derusting equipment, tanks and flow lines.

This cleaner is safe to use in cleaning multi-metal systems containing carbon steel,

DG-1055N is a concentrated, water-soluble, highly rinsable combination of mild natural detergents, surfactants, and grease emulsifiers that will function extremely well in fresh or brine water. The balanced emulsification system and moderate pH is ideally suited for degreasing tanks and barges before welding or personnel entry safely and effectively.

DG-1055N has been proven to be very effective in cleaning grease, oils, drilling muds, diesel and hydraulic fluids from metal surfaces. DG 1055N

DG-955 is a concentrated, water-soluble, highly rinsable combination of mild natural detergents, surfactants, and grease emulsifiers that will function extremely well in fresh or brine water. The balanced emulsification system and moderate pH is ideally suited for degreasing tanks and barges before welding or personnel entry safely and effectively.

DG-955 has been proven to be very effective in cleaning grease, oils, drilling muds, diesel, chemical residues, and hydraulic fluids from metal