AC-700 and AC-700M are a biodegradable cleaners for heat transfer systems, hot oil units, glycol dehydration systems and cooling systems (radiators). AC-700 is a concentrated, essentially neutral pH (5.8) solution specially formulated to remove rust, mineral scale and corrosion by products from most heat transfer systems. AC-700M is more aggressive with a lower pH (3.5) for heavy scale deposits. Both AC-700 and AC-700M are safe to use in cleaning multi-metal systems containing carbon steel,

ALL WEATHER ANTI-FREEZE is a concentrated, premium grade, single phase, ethylene glycol base antifreeze containing a highly effective inhibitor designed to provide anti-foam, rust and corrosion protection for metals such as brass, copper, solder, steel, cast iron and aluminum. This antifreeze contains a low concentration of silicates and mixes readily with both deionized and tap water. ALL WEATHER ANTI-FREEZE is compatible with filters often utilized in cooling systems and is recommended for

ALL WEATHER ANTI-FREEZE RTU is a premium grade, ready to use, ethylene glycol base antifreeze/coolant containing highly effective corrosion and scale inhibitors. It is designed to provide anti-foam, rust, corrosion and scale protection for metals such as brass, copper, solder, steel, cast iron and aluminum normally found in cooling systems. ALL WEATHER ANTI-FREEZE RTU also helps to reduce cavitation and increases circulation pump life. This antifreeze contains a low concentration of silicates

BAF inhibited propylene glycol based coolants are designed specifically for long term demanding service in large stationary engines like those running compressors to transmit natural gas through pipeline distribution systems. BAF can also be used in s mall field compressors, line heaters, engine generators, industrial diesel engines without aluminum cooling systems or whatever heat transfer fluid must provide protection against freezing, have low vaporization losses at high operation

Pre-diluted with de-mineralized water, BAF-RTU antifreeze is “ready-to-use”. This eliminates mistakes in the field and guarantees the equipment is receiving corrosion and freeze protection to the desired limits. Available in UN approved 5 gallon pails, 55 gallon drums and bulk quantities.

CW-299 is a high performance, cleaning compound great for cleaning high compression, high heat engines, large and small. This detergent was specifically designed to be used in jet spray cabinets and agitated tanks. CW-299 is a biodegradable, non-foaming cleaning compound that removes rust, scale, carbon, paint, grease and oils. It is free-rinsing and leaves metal looking like new. Available in 50 pound pails and 450 pound drums.

EXTEND 50 is an ready to use ethylene glycol based fluid that provides maintenance-free protection against freezing, boiling and corrosion. EXTEND 50 coolant life is often good for the whole life of the engine through the use of virtually non-depleting corrosion inhibitors. EXTEND 50 provides long-life corrosion protection for all engine metals, including aluminum and ferrous alloys. EXTEND 50 is expected to provide protection for at least 14,000 hours, 500,000 miles, or 6 years. Available in

EXTEND 95 is an ethylene glycol based fluid that provides maintenance-free protection against freezing, boiling and corrosion. EXTEND 95 coolant life is often good for the whole life of the engine through the use of virtually non-depleting corrosion inhibitors. EXTEND 95 provides long-life corrosion protection for all engine metals, including aluminum and ferrous alloys. EXTEND 95 is expected to provide protection for at least 14,000 hours, 500,000 miles, or 6 years. Available in UN approved 5

PARTS WASHING SOLVENT LO is an economical blend of low aromatic solvents specially formulated for equipment and parts cleaning. PARTS WASHING SOLVENT LO is very effective in cleaning all types of oils and greases from metal parts. PARTS WASHING SOLVENT LO is non-toxic, has a flash point above 145° F, does not contain mineral spirits, and has a relativity low odor.

RP-500 is an outstanding water displacing, non-staining rust preventative that will rapidly separate water displaced from metal surfaces after machining operations or after alkali cleaning. The ultra thin, highly protective films applied to unpainted or painted surfaces are effective in the protection of ferrous and non-ferrous metals from atmospheric corrosion even under conditions of high humidity, both fresh or salt mists. Various blends of RP-500 meet or exceed the following MIL-SPECS: