SPEC LUBE 1510 is a concentrated, biodegradable, moderate pH water soluble rolling, drawing, cutting and cooling fluid that provides strong EP properties, rust protection and low surface tension to metal working fluids. SPEC LUBE 1510 provides excellent performance as an extreme pressure and lubricity additive, emulsifier, and rust inhibitor. SPEC LUBE 1510 is very effective when used as a replacement for oil based rolling lubricants, as an additive in for water based hydraulic fluids, and liquid drawing compounds.

SPEC LUBE 1510 is non-toxic and does not contain any EPA rated hazardous solvents. Available in 5 gallon pails, 55 gallon drums and bulk quantities.

===

SPEC LUBE-1510 is a concentrated, moderate pH water soluble rolling, drawing, cutting and cooling fluid that provides strong EP properties, rust protection and low surface tension to metal working fluids. SPEC LUBE- 1510 provides excellent performance as an extreme pressure and lubricity additive, emulsifier, and rust inhibitor. SPEC LUBE-1510 is very effective when used as a replacement for oil based rolling lubricants, as an additive in for water based hydraulic fluids, and liquid drawing compounds. SPEC LUBE-1510 is non-toxic and does not contain any EPA rated hazardous solvents. SPEC LUBE-1510 is safe to use in multi-metal systems containing carbon steel, copper and aluminum. SPEC LUBE-1510 is formulated to be diluted with water at 5% concentration, however, depending on usage, SPEC LUBE-1510 is effective used between 1% and 10% concentration depending on load. Falex EP test procedure with an aqueous solution of 5% SPEC LUBE-1510 achieved 60 torque @ 3000 pounds load without failure. Foaming Test (Ford Motor Company Test #MC-BT1-1) with an aqueous solution of SPEC LUBE-1510; Foam Height 0.0” after 5 minutes. Rust Test: (Cast Iron Chip Procedure) 5% concentration of SPEC LUBE-1510. Result: NO RUST. Available in UN approved 5 gallon pails and 55 gallon drums.