General Description

AC-90 is a blend of surfactants, water-based solvents, alkaline detergents and derusters especially formulated to melt away oily deposits and dissolve scale from heat transfer surfaces such as those found in boilers, air conditioner units, and other types of heat exchangers. When applied as directed, AC-90 will immediately begin removing dirt, oil, and scale with a unique foaming action that pushes the soils away from the surfaces so they may be rinsed way easily. AC-90 contains a high level of alkaline salts and special care should be used when cleaning aluminum.

Application/Dilution

AC-90 can be diluted or used as is for quick results. Dilution rates vary depending on cleaning difficulty. Product can be sprayed or poured on surfaces to be cleaned. Allow ample time for the product to penetrate soils, scrub any stubborn areas, then rinse with hot or cold water.

Always spot test painted surfaces prior to wide spread application. AC-90 can be sprayed, brushed or poured onto surfaces to be cleaned.

Physical Properties

Availability

AC-90 is available in UN approved 1 gallon pails, 5 gallon pails, 55 gallon drums and bulk quantities.

Handling

Observe warning label on containers. Normal precautions for indus­trial chemicals apply.