ALUMINUM BRIGHT 4 is a blend of aggressive acids, detergents and cleaners designed to clean aluminum, stainless steel and fiberglass. A unique detergent action is strong enough to remove carbon deposits. ALUMINUM BRIGHT 4 contains Hydrofluoric Acid.
Dilute ALUMINUM BRIGHT 4 in ratios of 1 : 5 or 1 : 10 in water depending on surfaces to be cleaned. ALUMINUM BRIGHT 4 can be applied with a brush or sprayer on wet surfaces. Apply from the bottom and work up allowing two to five minutes for penetration of the deposits. Rinse well with water while brushing in order to get a brighter surface. For fiberglass, use 1 : 10 ratio with water, spray or brush onto surface, brush off deposits and rinse.
|Freeze Point||28° F|
ALUMINUM BRIGHT 4 is available in UN approved 5 gallon pails, 55 gallon drums and bulk quantities.
Observe warning label on containers. Normal precautions for industrial chemicals apply. Extreme care should be used when handling this product. Use proper personal protection as per MSDS.
aka: ALUM BRITE 4, ALUMBRITE 4, ALUM BRIGHT 4, ALUMINUM BRITE 4